Description
Lugol PVP Stabilised Solution – IVD reagent for microbiology and parasitology
The Lugol solution stabilised with PVP is an iodine-iodide solution stabilised with polyvinylpyrrolidone (PVP/Povidone), manufactured by Pro-Eko Srl as an in vitro diagnostic medical device (IVD). Compared to the classic, non-stabilised Lugol solution (I₂ + KI in water), the PVP formulation provides greater long-term stability of the iodine-PVP complex, better staining reproducibility and lower volatility. It is a dark brown liquid solution. It is used as an auxiliary reagent in Gram staining in bacteriology, in the direct microscopic examination for intestinal parasites (protozoa, helminths) and in some histological procedures.
Composition and technical characteristics
| Parameter | Value |
|---|---|
| Type | Lugol solution stabilised with PVP |
| Main components | Iodine (I₂) + Potassium iodide (KI) + PVP (Polyvinylpyrrolidone) |
| CAS iodine | 7553-56-2 |
| CAS potassium iodide | 7681-11-0 |
| Appearance | dark brown liquid solution |
| Bottle volume | 1 Lt |
| Product type | IVD medical device |
| Storage | room temperature (15–25°C), in the dark |
| Precautions | do not expose to direct light – reduces free iodine concentration |
How Lugol PVP works and what it is used for
Iodine in solution (I₂ + I⁻ → I₃⁻) forms coloured complexes with biological structures rich in polysaccharides and proteins. In microbiology, Gram staining uses Lugol as a mordant: the crystal violet–iodine complex that forms inside the thick peptidoglycan wall of Gram-positive bacteria resists subsequent decolourisation with alcohol/acetone, giving the characteristic blue-violet staining. Gram-negative bacteria, with a thin peptidoglycan layer, do not retain the complex and are then counterstained with safranin (red-orange).
In parasitology, Lugol applied directly to faecal samples stains the nuclei of intestinal protozoa (Entamoeba histolytica, Giardia intestinalis, Blastocystis hominis) and cyst glycogen brown, facilitating morphological identification under light microscopy. This technique is recommended by the World Health Organization (WHO) and the Istituto Superiore di Sanità (ISS) in protocols for the diagnosis of intestinal parasitosis.
Sources: WHO – Manual of Basic Techniques for a Health Laboratory (WHO, 2003); Istituto Superiore di Sanità (ISS) – diagnostic parasitology protocols; ECHA – C&L Inventory iodine CAS 7553-56-2 (echa.europa.eu).
Procedure
Gram staining (step 3):
- After crystal violet staining, apply the Lugol solution covering the preparation
- Leave to act for 60 seconds
- Drain without rinsing and proceed with alcohol-acetone decolourisation
Direct parasitological examination:
- Spread a small amount of faecal sample in saline solution on a slide
- Add 1 drop of Lugol PVP next to the preparation
- Cover with a coverslip and observe at 10x and 40x: protozoan nuclei appear brown, glycogen yellow-orange
Histological post-fixation (mercury salts):
- Treat the section with Lugol solution for 5 minutes
- Wash in distilled water
- Treat with 5% sodium thiosulfate for 5 minutes to decolourise
- Wash and proceed with the desired staining
Areas of application
- Bacteriology: mordant in Gram staining for identification of Gram-positive and Gram-negative bacteria
- Diagnostic parasitology: direct microscopic examination of faecal samples for intestinal protozoa and helminths
- Mycology: detection of fungal structures in biological samples
- Histology: post-fixation of sections treated with mercury salt-based fixatives (Zenker, Helly)
- Analytical chemistry: indicator for the detection of starch and polysaccharides
For other microbiological and parasitological reagents see the IVD diagnostics category.
CLP classification and safety
The Lugol solution contains iodine (CAS 7553-56-2) and potassium iodide. The CLP classification of the mixture includes: Aquatic Chronic 3 – H412 (harmful to aquatic life with long-lasting effects); some formulations may have additional classifications depending on concentration. Do not release into the environment. Refer to the updated SDS of the batch for complete safety and disposal information.
IVD compliance and documentation
The product is classified as an in vitro diagnostic medical device (IVD) under Regulation (EU) No 2017/746 (IVDR). Product management complies with the requirements of Regulation (EC) No 1907/2006 (REACH) and Regulation (EC) No 1272/2008 (CLP) for chemical components. For regulatory information: ECHA.
Customisation and contract manufacturing
Pro-Eko Srl manufactures Lugol solution in different commercial formats on request. Concentration variants, customised packaging and IVD documentary management for accredited facilities are available.
Pro-Eko Srl
Pro-Eko Srl is a manufacturer and supplier of microbiological reagents, IVD diagnostic stains and ready-to-use solutions for clinical and research laboratories. The catalogue includes Gram staining solutions, haematological stains, parasitology and histochemistry reagents.
Frequently Asked Questions (FAQ)
What is the difference between classic Lugol and Lugol PVP?
Classic Lugol (I₂ + KI in water) is less stable: free iodine is volatile and degrades in light. The PVP formulation stabilises the iodine-povidone complex, ensuring greater shelf life, reproducibility and lower iodine vapour volatility.
How should Lugol PVP be stored?
In the dark, at room temperature (15–25°C), in a tightly closed container. Avoid exposure to direct light and high temperatures, which degrade the iodine-PVP complex.
Can it be used for malaria diagnosis?
No. Malaria diagnosis is based on Giemsa staining or the thick smear method. Lugol is not indicated for the diagnosis of blood parasites.
Is it an IVD medical device?
Yes. The product is classified as an in vitro diagnostic medical device under Regulation (EU) No 2017/746 (IVDR).





