Description
Starch indicator solution 1% – indicator for iodometry
The 1% starch indicator solution is a stabilised aqueous solution of soluble starch, used as a colour indicator in iodometric and iodimetric titrations. The active ingredient is soluble starch (CAS 9005-84-9), a mixture of polysaccharides (amylose and amylopectin) in a 1% w/v aqueous solution. In the presence of molecular iodine (I₂) and the triiodide ion (I₃⁻), amylose forms an inclusion complex with an intense blue-violet colour, visible even at very low iodine concentrations. The disappearance of this colour at the equivalence point allows precise identification of the titration end point.
The solution is stabilised to ensure the indicator’s activity is preserved over time. Pro-Eko Srl supplies this reagent in a 1000 ml bottle with batch traceability and a Safety Data Sheet (SDS), ready for direct use in the laboratory.
Composition and properties
| Parameter | Value |
|---|---|
| Active ingredient | Soluble starch |
| CAS number (soluble starch) | 9005-84-9 |
| Concentration | 1% w/v in water |
| Appearance | aqueous solution, opalescent or slightly milky |
| Colour | colorless or opalescent white (no iodine) |
| Colour change with iodine | intense blue-violet |
| Bottle volume | 1000 ml |
| Storage | in the dark, in a cool place (2–8°C or as indicated on the label) |
What the starch indicator solution is used for
The starch indicator solution is an analytical reagent used as an end-point indicator in iodometric methods. According to the European Pharmacopoeia (Ph. Eur.) and harmonised official analytical methods, the starch indicator is recommended in titrations with sodium thiosulfate, where it indicates the disappearance of free iodine with a colour change from blue-violet to colorless. It is also used in the analysis of food, water and industrial raw materials where oxidising or reducing substances need to be quantitatively determined using iodometric methods.
The Italian Chemical Society and EURACHEM guidelines list the starch indicator solution among the reference indicator reagents for iodine-based redox titrations. Its use is well established in chemical analysis laboratories, industrial quality control and research.
Sources: European Pharmacopoeia (EDQM/Ph. Eur.) – methods for iodometric titrations; Regulation (EC) No 1333/2008 (starch, food additive); PubChem CID 24836924 (starch, soluble – National Library of Medicine, NIH).
Product features
The 1% starch indicator solution is stabilised to maintain colour reactivity over time and reduce precipitate formation. The solution is supplied in a 1000 ml bottle. If sediment forms at the bottom, shake well before use. Store the bottle in the dark, well sealed and in a cool place. Do not release into the environment after use.
For each delivery, a Safety Data Sheet (SDS) is available and, on request, a Technical Data Sheet with batch characteristics.
Areas of application
The 1% starch indicator solution is used in the following contexts:
- End-point indicator in iodometric titrations (e.g., determination of vitamin C, hypochlorite, dissolved oxygen)
- Iodimetric titrations with iodine as titrant
- Quality control in chemical, pharmaceutical and food laboratories
- Water analysis (determination of residual chlorine and oxidants)
- Educational activities in analytical chemistry laboratories
For other analytical reagents and laboratory indicators see the chemical products category.
CLP classification and safety
The 1% starch indicator solution is not classified as a hazardous substance or mixture under Regulation (EC) No 1272/2008 (CLP) under standard conditions of use as a diluted analytical reagent. The solution does not require CLP hazard pictograms at the indicated use concentrations. Always refer to the updated Safety Data Sheet (SDS) for specific safety, storage and disposal information for the supplied batch.
Compliance and documentation
The product is managed in compliance with Regulation (EC) No 1907/2006 (REACH) and Regulation (EC) No 1272/2008 (CLP). The SDS is the primary reference for classification, safety information and disposal. For information on components registered under REACH, see the European Chemicals Agency portal: ECHA.
Customisation and contract manufacturing
Pro-Eko Srl evaluates, on request, customised supplies of analytical reagents for industrial and structured laboratories. Arrangements are possible for dedicated batches, alternative packaging formats and documentary support for reagent qualification activities within ISO quality management systems.
Pro-Eko Srl
Pro-Eko Srl is a supplier of analytical reagents, dyes and laboratory products for industry, research and diagnostics. The range includes titration reagents, microscopy stains and chemical indicators, with documentary management and batch traceability for every supply.
Frequently Asked Questions (FAQ)
What is the 1% starch indicator solution?
It is a 1% aqueous solution of soluble starch, used as an indicator in iodometric titrations. In the presence of iodine it forms a visible blue-violet complex; the disappearance of the colour indicates the titration end point.
How is the starch indicator solution used?
A few drops (1–2 mL) are added to the solution being titrated shortly before the expected end point. The colour change from blue-violet to colorless indicates the disappearance of free iodine and the equivalence point.
How should the starch indicator solution be stored?
Store in the dark, well sealed, in a cool place (2–8°C or as indicated on the product label). If a precipitate forms, shake before use. Do not expose to direct light.
Is the starch indicator solution hazardous?
No. The 1% solution is not classified as hazardous under CLP. Refer to the SDS for specific storage and disposal information.






