Chemistry

Ammonium Chloride: Properties, Uses and Professional Purchase

Ammonium chloride (NH₄Cl, CAS 12125-02-9) — also known as sal ammoniac — is a white, crystalline inorganic salt that is highly soluble in water. From soldering to the…

Andrea Greco 4 min lettura

Ammonium chloride (NH₄Cl, CAS 12125-02-9) — also known as sal ammoniac — is a white, crystalline inorganic salt that is highly soluble in water. From soldering to the pharmaceutical industry, from fertilizers to the chemical laboratory, it is a widely used reagent in professional and industrial settings.

Physico-chemical properties

Property Value Source
CAS 12125-02-9 CAS Registry
Formula NH₄Cl PubChem CID 25517 / NIH
EC Number 235-186-4 ECHA
Molecular mass 53.49 g/mol PubChem / NIH
Appearance White powder or crystals ECHA
Water solubility 383 g/L at 20°C PubChem / NIH
pH (5% solution in water) ~4.6–5.2 PubChem / NIH
Sublimation point 338°C (does not melt, sublimes) ECHA

What is ammonium chloride used for: main applications

Soldering flux

One of the oldest and most important uses of ammonium chloride is as a flux for soldering and tinning: it reacts with surface metal oxides (copper, zinc, iron oxides) forming volatile chlorides, which are removed during heating. This ensures a clean metal surface and improves the adhesion of the solder alloy. It is the active ingredient of “soldering salt”.

Nitrogen fertilizer (N: 26%)

Ammonium chloride is a nitrogen fertilizer with an N content of 26% (ammoniacal nitrogen), suitable for crops that tolerate or require chloride input (rice, sugar cane, coconut palm). In Europe it is regulated under Regulation (EU) 2019/1009 on fertilizing products. It is not recommended for crops sensitive to halides (tobacco, potato, tomato).

Use in chemical laboratories

In the laboratory, ammonium chloride is used as:
– Ammonia buffer (NH₄Cl/NH₃): pH 9–10 buffer solution for volumetric analysis and selective precipitations
– Reagent for hydroxides: selective precipitation of metal hydroxides in analytical chemistry
– Component of electrochemical cells: in Leclanché cells (zinc-carbon) as the electrolyte in the wet paste

Pharmaceutical and food industry

Ammonium chloride is used in small quantities as an expectorant in pharmaceutical formulations (cough, bronchitis) due to its mucolytic action. In the food sector it is authorized as additive E510 (Regulation (EC) 1333/2008) as an acidity regulator in bread and bakery products in some EU countries. According to EFSA, no numerical limits have been set (use at functional dose).

Surface treatment of metals

In hot-dip galvanizing, it is used in solution as a pickling agent and flux to remove iron oxides before immersion in molten zinc. It is also used as an activator in nickel plating and electrodeposition processes.

CLP classification and safety

Harmonized classification according to Annex VI of Regulation (EC) No. 1272/2008 (CLP) and the ECHA C&L Inventory:

  • Acute Tox. 4 (H302): harmful if swallowed
  • STOT RE 2 (H373): may cause damage to organs (kidneys) through prolonged or repeated exposure
  • Aquatic Chronic 3 (H412): harmful to aquatic life with long-lasting effects

Ammonium chloride is not classified as corrosive or flammable. In case of accidental ingestion, consult a doctor. Do not release into sewers or watercourses. Source: ECHA, C&L Inventory, Annex VI of Regulation (EC) 1272/2008.

REACH compliance: not included in the ECHA Candidate List for SVHCs (2024). Not subject to Annex XIV authorization.

Where to buy ammonium chloride for professional use

Pro-Eko Srl distributes pure ammonium chloride (CAS 12125-02-9) for laboratories, industry and professional technical use. Every supply includes an SDS compliant with Regulation (EU) 2020/878, a Certificate of Analysis (CoA) with batch traceability, and a technical data sheet.

Sales are reserved for professional users with a VAT number. Shipping within 72 hours throughout Italy. Order ammonium chloride at proekosrl.com →

Andrea Greco
Author

Andrea Greco

Chimico farmaceutico, Co-Owner e Chief Technology Officer (CTO) di Pro-Eko S.r.l. Segue innovazione, trasferimento tecnologico, scale-up, processi produttivi, qualità e compliance nei progetti chimici e diagnostici conto terzi.